If you have asked for a consigned assembly (or partial turnkey) quote, then at the time of placing the order you will be sending us the components for assembly. Please note our requirements for kitting the components.

1) We require extra components for assembly attrition as follows:

Discrete SMT passives:
0201size: 20% extra, subject to a minimum of 100 extra.
0402 size: 20% extra, subject to a minimum of 70 extra.
0603 size: 10% extra, subject to a minimum of 50 extra.
0805 size: 10% extra, subject to a minimum of 20 extra.
1206 or larger size: 10% extra, subject to a minimum of 10 extra.

Active Devices:
10% extra for devices costing < $1.00 ea, subject to a minimum of 1 extra.
5% extra for devices costing between $1.00 to $5.00 each, subject to a minimum of 1 extra.
1% extra for devices costing >$5.00 each, subject to a minimum of 1 extra.

Thru-Hole devices:
5% extra for devices costing up to $5.00 each, subject to a minimum of 1 extra.
1% extra for devices costing > $5.00 each, subject to a minimum of 1 extra.

Hardware items (screws, nuts, washers, etc):
5% extra, subject to a minimum of 5 extra.

2) Insufficient attrition would be construed as parts shortage.

3) All SMT components must be in reels / continuous tapes (minimum 6” long) / tubes / or trays, unless prearranged.

4) All Through-hole (DIP) ICs must be supplied in trays or tubes or tapes.

5) All consigned parts must be shipped to us in a properly kitted form (each line item of BOM in a separate bag, properly marked for identifying the component unambiguously).
6) Kits for multiple jobs must be in SEPARATE BAGs identified by appropriate assembly order number.

All unused components will be carefully repackaged and returned to you.

&nbsp;